- 0 kr
Watch this product and we will notify you once it is back in stock.
100% compatible with Bang & Olufsen link products
Almando Masterplay is suitable for all AUDIO products from Bang & Olufsen - such as Beolab 3500, BeoLab 2000, LCS9000, Beolink Passive and BeoLink Active.
You can either connect B&O or other manufacturers to your existing Masterlink system and operate your Linkroom speakers. Master Play detects when the connected source is running, and activates the Master Link speakers automatically.
How about the music on your iPhone? Want to play your music from iPhone on your B&O Masterlink Link Speaker and be able to move freely in the room - without the need for a docking station and remote control?
All you need is an Apple Airport Express and our Almando Masterplay. Start your music on your iPhone or iPad and you'll hear it instantly from your Link speakers. A Beomaster from the Bang & Olufsen system is not necessary for this purpose - you do not even need a B&O remote control.
By the way, you can also use the Airplay function if you use a Sonos Connect instead of an Apple Airport Express - you also get even more possibilities (Internet radio, music services such as Spotify, etc.).
In a Sonos Multiroom system
Connect Sonos to Almando Masterplay and your Masterlink speakers and enjoy an endless selection of songs and radio stations from around the world. In this way, your home gets a Multiroom system that is first class and easy to use. In each zone (room) of your Sonos multiroom system, you can play different music in each room or in the party mode in perfect synchronization the same music in all rooms.
BeoLab 3500 as a center speaker for your TV
The modern TV, n becomes that flatter this brings to a flat sound quality.
Thanks to its design, the BeoLab 3500 (or the previous version, LCS 9000) is ideal as a center speaker for your TV. Just connect the analog output of your TV to Master Play. When you turn on your TV you hear this fantastic sound of your Beolab 3500 starting at the same time as your TV.
The only requirement is that your TV must have a volume controlled analog output. Some TVs from Samsung, Sharp, Panasonic, Sony, Toshiba, LG, etc. have audio output via RCA jack volume control, which can be set in the TV menu. If this is not possible with your TV, most devices still have a headphone output - which is always volume controlled.
The following B&O products can be connected:
- BeoLab 2000
- BeoLab 3500
- LCS 9000
- BeoLink Passive
- BeoLink Active
Masterlink socket or RJ45 connector - the choice is yours
If you have a classic Masterlink cable (ie a cable with two Master Link connectors on both ends), you of course choose the version with Masterlink outlets take the version with RJ45 connector. For this purpose, there are special adapter cables (Master Link on RJ45) or RJ45 screw terminals (You can, for example, connect a "half" Master Link cable, which you previously removed from their junction box).
EASY TO INSTALL
Plug and Play
Installation of Masterlay easy - just connect together, activate the timer on the Master speaker and possibly press when another alternative switch is needed and the unit is switched on after a few seconds.
As a rule, the installation is already done. Still, the device offers any option, to set the delay time for untriggered audio signals (intelligent signal detection) with DIP switches.
Automatic activation of intelligent signal detection
When a signal is present, Almando Mästarplay senses this and converts the signal into a Master Link signal. If the source gives no signal (eg when switched on or off), an intelligent circuit guarantees an overrun of about ½ or 2 minutes (adjustable) - This is necessary for example, for longer breaks between your songs.
The B&O Masterlink products remain original
(No change needed!)
100% compatible with Bang & Olufsen
works with Beolab 3500, Beolab 2000, LCS 9000,
therefore works with BeoLink Passive Active BeoLink
100% compatible with Apple Airport Express
volume control directly on your iPod, iPhone, iPad
100% compatible with Sonos Connect (ZP90)
volume control Directly on SONOS Control, iPod, iPhone, iPad, Android
Automatic activation of Master Link speakers
as soon as an audible signal is detected B&O remote control is not necessary
Play a different type of music on each Masterlink speaker set
is connected to Master Play or listen to the same music in every room
in party mode.
Use the Beolab 3500 as a center speaker for your TV
The analog output of your TV must be variable (volume regulated)